Placed tube rain test machine, put the pipe rain device 

 One, put the pipe to the rain and the role of testing machine: 
 Placed tube rain testing machine is mainly used for the assessment of electric and electronic products shell seals in the water after the test, or during the trial period to ensure good working performance and the technical condition of the equipment and components. Products during transport or use may be subject to the impact of flooding, to provide a reference basis for the technical standards for products. Artificial rain test, based on natural conditions of rain with strong wind, do not consider the introduction of a large number of water by the specimens in high temperature and rain water temperature temperature difference. The Wuhan yet measured the pendulum tube testing machine to apply to exterior lighting and signaling devices, and automotive lamps shell protection. 
 Two, put the tube rain test machine Model Category: 
 1, BL-04: put the tube radius: 0.4M 
 2, BL-06: put the tube radius: 0.6M 
 3, BL-08: put the tube radius: 0.8M 
 4, BL-10: put the tube radius: 1.0M 
 5, BL-12: put the tube radius: 1.2M 
 Placed tube rain testing machines Description: 
 1, put the tube radius: the R500, R600, 
 2, put pipe sprinkler angle: ± 60 °, ± 180 ° 
 3, swing tube swing angle amplitude: ± 45 °, 60 °, 135 °, 150 ° 
 4, put the pipe sprinkler Aperture:? 0.1 
 5, put the tube speed: Stepless 
 6, the water flow rate: 10 ± 5% / min (adjustable) 
 7, the rain water pressure: 80 ~ 100KPa (adjustable) 
 8, the speed of the test rig: 1r/min 
 9, the test bed size:? 600 
 10, the spray water: clean soft water 
 Placed tube rain and the structure of the test machine: 
 Wuhan still Inspection Equipment Co., Ltd. rain test equipment to test drive by the pendulum tube stent placed tube, the work of the rotary table, electrical control of four parts, in which the stent, the turret shield, console SUS304 stainless steel hairline sheet production. 
 Placed tube rain testing machine works: 
 A testing machine, swing pipe swing pipe swing: driven by the motor, inverter (imported) reducer, eccentric institutions, rack and pinion and other mechanical drive to achieve. Inverter to regulate the number of swing pipe (per unit time), by the eccentric wheel angle adjustment. 
 2, put the pipe test machine table rotation: motor driven turbine deceleration rotation, to achieve the table rotation speed. 
 3, the nozzle: the size of the specimen, and decided to put the tube bending radius. The nozzle is detachable special nozzle, the nozzle aperture replaced at any time according to the requirements of the standard, so that the injection of water droplets evenly, adequate flow. 
 Four waterways: open style swing tube rain must consider drainage, should be considered in civil engineering to quickly emissions, no water is better. Another storage tank to be equipped with a considerable capacity to supply necessary for the tests. 
 Wuhan is still measured pendulum tube rain test machine is the production of reference the GB GB4208G, GB/T4942.2/93, GB / T-2423.38-90 and other relevant standards. 
 Wuhan is still testing inspection equipment Co., Ltd. 
 Mobile Phone: 13,507,176,007 13,507,192,007 13,995,654,007 
 QQ number: 188 439 506 188 439 507 
 Tel :027 -86,836,568 
 Fax :027 -86,728,253 
 Web site: http://www.suncek.com 
 E-mail: whsc@suncek.com 

 Slogan: 
 High-end quality, intelligent operation, simplified maintenance